Torack Garage Storage System: How the Track System Works and Whether It's Worth It

The Torack garage storage system is a wall-mounted track rail system that lets you hang and rearrange hooks, shelves, baskets, and bike holders on a set of horizontal metal rails without drilling new holes for every accessory. If you're evaluating Torack, the key facts are: the rails mount to studs, accessories slide along the rail and lock in place, and the whole system stays reconfigurable as your storage needs change. It's a solid mid-range option in the garage track storage category, competing with Rubbermaid FastTrack and StoreWALL.

I'll break down how the system actually works, what it costs, how it compares to alternatives, and who should consider it.

How Torack's Track Rail System Works

The system starts with horizontal metal rails, typically 48 or 60 inches long, that mount to the wall. You drive screws through the rail into studs. Once the rails are up, every Torack accessory uses a bracket with a hook that slots into the rail's channel, slid into position, and locks with a turn or press.

The practical result: you can add a hook, move it 6 inches to the left, or swap it for a shelf, all without touching a drill. The accessories are locked securely when in position but freely repositionable when you want to reconfigure.

Rail Spacing and Layout

Most Torack systems use rails spaced 12-16 inches apart vertically on the wall. A typical installation covers one or two wall sections with 2-4 rails per section.

The accessory mounting brackets are designed to span specific rail spacings. A single-rail accessory (like a simple hook) works with any rail spacing. A shelf or bike holder that spans two rails needs the correct spacing.

Before buying, measure your stud spacing (16 or 24 inches on center in most homes) and the rail spacing you're planning. Most Torack packages list the compatible stud spacing.

Torack Accessories

The value of any track system is the accessory ecosystem. Torack's lineup includes:

Standard hooks: Single and double hooks for tools, cords, garden hoses, and miscellaneous items. These are the most common accessory and are included in starter kits.

Bike holders: Both vertical (fork mounts) and horizontal (wheel cradles) options. A vertical fork mount holds one bike nearly flush to the wall; a horizontal cradle holds a bike parallel to the wall at handlebar height.

Shelves: Wire shelves and solid shelves in various depths (6, 12, and 18 inches are common). These snap onto two rails and hold bins, supplies, and heavier items.

Tool holders: Long-handled tool (rakes, shovels, brooms) holders clip in horizontally and grip the tool handle.

Bins and baskets: Wire baskets that hang from a single rail for small items, sports balls, or garden accessories.

A basic starter kit from Torack typically includes 2 rails plus an assortment of hooks, costing $60-100. Full wall setups with shelves, bike holders, and multiple hook types run $150-300.

Installation: What to Know

Installing the rails is the only part of Torack that requires a drill and stud finding. The process:

  1. Find wall studs (usually with a stud finder or by tapping)
  2. Mark the stud locations at your desired rail height
  3. Hold the rail level at the mark and drive screws through the pre-drilled holes into studs
  4. Repeat for each rail at your planned spacing

The most common mistake is not getting the first rail perfectly level. Use a long level (at least 2 feet) and check level before driving all screws. If you drive all the screws in before checking level, backing them out and repositioning is annoying.

The second rail needs to be parallel to the first. Use a tape measure to maintain consistent spacing at multiple points across the rail length.

Torack vs. Rubbermaid FastTrack vs. StoreWALL

These three systems cover the same market. Here's an honest comparison:

Rubbermaid FastTrack: The most widely available (Home Depot carries it year-round). Compatible accessories are readily available in stores. The rail profile is slightly different from Torack, so accessories are not interchangeable. FastTrack accessories are priced competitively.

StoreWALL: Uses a PVC panel system similar to slatwall rather than metal rails. More weather resistant in humid garages. Higher upfront cost for the panels but very flexible accessory ecosystem. Better for garages with moisture issues.

Torack: Strongest price per hook for the rail and basic accessory value. Available primarily through Amazon. Less in-store presence means you can't inspect it before buying. The accessory ecosystem is smaller than FastTrack's, but covers the main use cases.

For a detailed comparison of multiple wall track systems, our guide to best garage wall track system evaluates the leading options with pricing and accessory availability.

Weight Capacity

Torack rails are steel, and the system's weight limits are reasonable for typical garage use:

  • Single hook: 50-75 lbs
  • Wire shelf (24 inches wide): 100-150 lbs
  • Bike holder: 50 lbs per mount (standard bike weight, covered)

The limiting factor for heavier accessories is whether the rail is anchored into studs. If you mount a rail to drywall only (no stud), the pull-out strength drops dramatically and isn't safe for anything beyond very light items.

Ideal Use Cases for Torack

Torack works best for:

Garages that change frequently: Households where sports equipment, bikes, and tool usage shifts seasonally. The reconfigurability is genuinely useful when you're rotating what's on the wall.

Renters or temporary setups: The rail mounting leaves relatively small holes, and the system can be fully removed and reinstalled in a new space.

Mixed storage needs: If your garage has bikes, garden tools, sports gear, and shop supplies all needing wall space, the variety of Torack accessories lets you customize each section.

For track storage options at different price points and with different features, the best garage track storage system guide covers the full range.

FAQ

Is Torack compatible with Rubbermaid FastTrack accessories? No. The rail profiles are different, so Torack accessories don't fit FastTrack rails and vice versa. If you're buying into a system, stick with one brand throughout to keep accessories interchangeable.

Can Torack hold a bike? Yes. Torack's bike holders are designed for standard adult bikes. A vertical fork mount holds the bike nose-in to the wall and requires the front wheel to be removed. A horizontal wheel cradle holds the bike by the tires and doesn't require wheel removal.

How many rails do I need? For a basic tool storage wall (one section of a two-car garage), 2-3 rails is a starting point. For a full wall of storage including bikes and shelves, 4-6 rails covering 8-10 feet of wall height gives full coverage.

Does Torack work on concrete or block walls? Yes, with appropriate anchors. Concrete screws (Tapcon style) or sleeve anchors work in concrete and block. Drill pilot holes with a masonry bit at the correct diameter for the anchor you're using.

The Bottom Line

Torack is a solid choice in the garage track storage category if you're buying through Amazon and want a system that balances price, weight capacity, and accessory variety. The reconfigurability is its main strength. Install the rails correctly into studs, plan your accessory layout before buying to avoid getting redundant pieces, and the system will serve your garage well through multiple reorganizations.